ESP-100-POE network lightning/surge protector 7.5v/70v clamp voltage surge protector the esp series of surge protectors are rugged and efectve surge protectors for ethernet based systems. they provide a high level of protecton against power surges caused by lightning and other causes. these surge protectors are used to protect expensive equipment from damage caused by electrical surges. they should be mounted as close to the protected equipment as possible. the all metal cast aluminum enclosure and shielded rj45 connectors provide for good emi noise suppression. the integral mountng feet can be screwed to a metal chassis to provide proper grounding or as an alternatve, there is an integral ground wire provided which can be connected to a ground for those systems that require a single point ground connecton. they are designed to be used indoors or outdoors, if inside a waterproof enclosure. the esp series are compatble with 100mbps data and 48v poe systems. protecton is provided on all 8 ethernet pins (7.5v clamping on data pins 1,2,3,6 and 70v clamping on poe pins 4,5,7,8). features markets ? 100mbps data rate ? compatble with 48v power over ethernet systems ? 7.5v data / 70v poe clamping voltage ? 5ka surge discharge current ? cat6 and cat5e compatble. all 8 pins protected. ? integral mountng feet and separate ground wire ? shielded rj45 jacks and metal enclosure for emi noise suppression ? complies with iec 61643-21 standard ? 802.3at compliant ? compact and rugged design americas: +1.847 839.6925 ias-americassales@lairdtech.com europe: +44.1628.858941 ias-eusales@lairdtech.com asia: ias-asiasales@lairdtech.com middle east & africa: +44.1628.858941 ias-measales@lairdtech.com www.lairdtech.com ? routers, access points and bridges ? wimax systems ? remote networking equipment ? point of sale systems ? soho equipment ? ip phone systems ? industrial control systems ? ip camera systems
specifications parameter performance operatng voltage data 5v ; poe 48v clamping voltage 7.5v data (pins 1,2,3,6) 70v poe (pins 4,5,7,8) max surge discharge current 5ka (8/20us) peak pulse current 100a (10/1000us) pins protected all 8 pins protecton mode diferental & common mode l-l, l-g insulaton impedance >1000 m max shunt capacitance <25pf data rate 100 mbps response time <5 ns operatng temperature 40c to +85c storage temperature -40c to +85c operatng humidity 0% to 95% non condensing size (l x w x h) 3.3 x 1 x 1 (83 x 25.4 x 25.4mm) size (overall) 3.7 x 1 x 1 (94 x 25.4 x 25.4mm) weight 2.8oz (80g) ground wire 14awg, 10.8 (275 +/-5mm) long connectors rj45 shielded jacks compliance operatng voltage data 5v ; poe 48v clamping voltage 7.5v data (pins 1,2,3,6) 70v poe (pins 4,5,7,8) ant-ds-ESP-100-POE 1116 any informaton furnished by laird inc. and its agents is believed to be accurate and reliable. all specifcatons are subject to change without notce. responsibility for the use and applicaton of laird materials rests with the end user, since laird and its agents cannot be aware of all potental uses. laird makes no warrantes as to the ftness, merchantability or suitability of any laird materials or products for any specifc or general uses. laird shall not be liable for incidental or consequental damages of any kind. all laird products are sold pursuant to the laird terms and conditons of sale in efect from tme to tme, a copy of which will be furnished upon request. ? copyright 2016 laird inc. all rights reserved. laird, laird technologies, the laird logo, and other marks are trade marks or registered trade marks of laird inc. or an afliate company thereof. other product or service names may be the property of third partes. nothing herein provides a license under any laird or any third party intellectual property rights. system ordering information ESP-100-POE network lighning/surge protector, lan/poe 7.5/70v clamp notes ? all shipments f.o.b. schaumburg, il 60173 ESP-100-POE network lightning/surge protector
|
